Showing 1–12 of 21 results
Discover a wide range of humanoid robot accessories designed to optimize functionality and customization. From advanced sensors to mobility enhancements, these accessories unlock new possibilities for research, education, and innovation.
Unitree AGX Module H1-2-275 Tops
In stock
$11,050.00| Compatibility: | Compatible with H1, H1-2 and B2 |
|---|---|
| External: | Externally mounted on the back of the robot (not built into the body) |
| No. of tops: | 275 Tops |
Unitree H1 AGX Module 275 Tops
In stock
$11,050.00| Compatibility: | Compatible with H1, H1-2 and B2 |
|---|---|
| External: | Externally mounted on the back of the robot (not built into the body) |
| No. of tops: | 275 Tops |
Unitree H1 AGX Module 550 TOPS
In stock
$11,050.00| Compatibility: | Compatible with H1, H1-2 and B2 |
|---|---|
| External: | Externally mounted on the back of the robot (not built into the body) |
| No. of tops: | 550 Tops |
Unitree H1 battery
In stock
$1,580.00| Model: | H1 Battery |
|---|---|
| Product size: | 120mm * 80mm * 182mm |
| Rated voltage: | DC 28.8V |
| Charging limit voltage: | DC 33.6V |
| Charging current: | 9A |
| Rated capacity: | 15000mAh, 432Wh |
| Executive standard: | IS 16046 (Part 2)/IEC 62133-2 |
| Innovative: | Self developed battery management system (BMS). |
| Function: | Power display, battery storage self discharge, balanced charging, overcharging, over discharge, short circuit and battery load detection protection. |
| Price Difference: | This price is for one H1 battery, One H1 requires 2 H1 batteries |
Unitree H1 Dedicated Computing Module 100 Tops
In stock
$4,800.00| Model | Nvidia Jetson Orin NX Compute Board Assembly*1 |
|---|---|
| No. Tops: | 100 Tops |
| Durability: | Specialized high-strength protective bracket. |
| Addon: | Externally mounted on the back (not built into the chassis). |
Unitree H1 Dedicated Computing Module 200 TOPS (200tops)
In stock
$9,600.00| Model | Nvidia Jetson Orin NX Compute Board Assembly*2 |
|---|---|
| No. of tops: | 200 Tops |
| Durability: | Specialized high-strength protective bracket. |
| Addon: | Externally mounted on the back (not built into the chassis). |
Unitree H1 Fast Charger
In stock
$560.00| Product size: | 210mm * 108mm * 48.2mm |
|---|---|
| Input power supply: | 100-240V~50/60Hz 4A 350VA |
| Output power supply: | 33.6V, 9.0A, 302.4W |
| Standard battery charging time: | 0.8h |
| Long range battery charging time: | 1.5h |
Unitree H1 gantry
In stock
$1,290.00| Safeguard: | For H1, Debugging Protection Bracket. |
|---|---|
| Inclusivity: | 1 set comes with H1 by default, if you need to purchase extra, extra charge is required. |
Unitree H1 Inspire Dextrous Hand (including one wrist DOF)
In stock
$8,900.00| Degrees of Freedom: | 6 |
|---|---|
| Number of Joints: | 12 |
| Repeat Positioning Accuracy: | ±0.20 mm |
| Max Grip Force (Thumb): | 6N |
| Max Grip Force (Fingers) : | 4N |
| Grip Force Resolution: | 0.50N |
| Thumb Lateral Rotation Range: | >65° |
| Thumb Lateral Swing Speed: | 235°/s |
| Thumb Bending Speed: | 150°/s |
| Finger Bending Speed: | 570°/s |
| Wrist Joint Rated Torque: | 3NM |
| Wrist Joint Peak Torque: | 7NM |
| Wrist Joint Rated Speed: | 120rpm |
| Wrist Joint Max Speed: | 200rpm |
| Deceleration Ratio: | 10:1 |
| Number of Pole Pairs: | 14 |
Unitree H1 Intel Core i7 Computing Board
In stock
$4,200.00| Assembly: | Intel Core i7 Computing Board Assembly*1. |
|---|---|
| Integration: | Boards are built into the robot body. |
| Capacity: | Up to 1 board can be built-in. |
Unitree H1 Texterous hand
In stock
$10,500.00| Dexterity: | Multi-jointed dexterous hand with ≥10 degrees of freedom in one hand. |
|---|---|
| Haptics: | Haptic array sensors for each finger, number of sensor contacts per finger >20. |
| Torque: | The maximum output torque of each finger joint is more than 0.7n.m, strong power. |
| Note: | Price for a single hand, generally 1 H1 optional 2 dexterous hands. |
Unitree H1 Third Party Thumbs Motor
In stock
$419.00| Model | Third-party thumbs motor LASF10-024D |
|---|---|
| Maximum thrust: | 150N |
| Stroke: | 10mm |
| Repeat positioning accuracy: | ±0.02 |
| Feedback: | Integrated force |